Fujitsu N800 User Manual

114

 

 U41243-J-Z156-1-76

System expansions

Ê

Populate the module you have just removed with the additional DIMMs (see 
the section “Installing DIMMs” on page 110).

If you are installing an additional module, this must be populated with the 
DIMMs before installation.

I

Install the module with the component side down.

Ê

Open the insert/eject levers of the module (by rotating them outward 90°) 
and slide the module into the slot guides of the empty slot until the levers 
engage with the flanges in front of the guides.

Ê

Simultaneously rotate the levers inward until they are flush with the edge of 
the module.

Ê

Mount the memory module cover (four screws) and the front bezel).

Ê

Use 

 to configure the system and if necessary specify the correct, 

expanded memory attributes.

For use 

, the remote test and diagnosis system, on the N800 servers 

an optional RemoteView IDE storage medium (chipDISK for RemoteView) is 
available.

The IDE storage medium is either pre-installed in the delivered server or is 
included in the delivery unit as a separate component. This depends of the way 

 has been ordered. The installation of the ChipDISK should only be 

executed by service technicians.

Usually the IDE storage medium is shipped with the 

/Diagnosis 

System pre-installed.

I

A supplementary order of a ChipDISK do not contains the pre-installed 

/Diagnosis System.