Fujitsu N800 User Manual

48

 

 U41243-J-Z156-1-76

Configuration software and utilities

You can call and use 

 under different circumstances:

–

When you turn on the system, after the POST memory test has been 
completed

–

When you reboot the system by pressing 

[Ctrl]

 +

[Alt]

+

[Del]

 in DOS mode

–

When you have moved the CMOS clear switch to the ON position (enabled) 
(see the section “Configuring the server and components” on page 38)

In the three above-mentioned cases, you will see the following prompt after the 
system has booted:

Press 

[F2]

 to enter SETUP

Ê

Press 

[F2]

 to enter 

.

I

In a fourth case, i.e. if CMOS/NVRAM has been corrupted, you will see 
other prompts but not the 

[F2]

 prompt:

Warning: CMOS checksum invalid
Warning: CMOS time and date not set

In this case, BIOS will load the default values into CMOS and attempt to 
boot.

When you see the 

[F2]

 prompt once more, set anew the System Time 

and the System Date with the Main Menu of the 

 (see section 

“Main Menu” on page 51)!