Fujitsu N800 User Manual
76
U41243-J-Z156-1-76
Server switches itself off
Troubleshooting and tips
7.2
Server switches itself off
Server management has detected an error
Ê
In the
ServerView
program, check the error list or the Error Log file with the
SCU utility
and attempt to eliminate the error.
7.3
Screen remains dark
Monitor is switched off
Ê
Switch on your monitor.
Screen has been blanked
Ê
Press any key on the keyboard.
or
Ê
Deactivate screen blanking (screen saver). Enter the appropriate password.
Brightness control is set to dark
Ê
Set the brightness control to light. For detailed information, please refer to
the operating manual supplied with your monitor.
the operating manual supplied with your monitor.
Power cable or monitor cable not connected
Ê
Switch off the monitor and the server.
Ê
Check whether the power cable is properly connected to the monitor and to
the grounded insulated socket.
the grounded insulated socket.
Ê
Check whether the monitor cable is properly connected to the server and
monitor (if it is plugged in with a connector). If a separate graphics card is
installed in the server, the monitor cable must be connected to the port of this
graphic card.
monitor (if it is plugged in with a connector). If a separate graphics card is
installed in the server, the monitor cable must be connected to the port of this
graphic card.
Ê
Switch on the monitor and the server.