Fujitsu RX200 S2 User Manual

121

PRIMERGY RX200 S2 User’s Guide    

Manu

al O
S

 In

st

allation

4.3 Installing the LAN Driver

This section explains the procedure for installing the driver.

 

In addition to the case where the OS is installed manually, the driver must be installed 

when a LAN card is added.

4.3.1 Installing the LAN Driver (Windows Server 2003)

The LAN driver installation procedure differs depending on whether the network adapter was 

recognized during the OS installation.

 For the following LAN cards, the network adapter is recognized when the card is mounted during OS 

installation.

• PG-1852

• PG-1862

1

Click [Start] 

→ [Administrative Tools] → [Computer Management].

2

Click [Device Manager].

On the Device Manager list, check if a recognized network adapter is present.

(Window example)

When a recognized network adapter is present, [Network adapters] appears.

• When a recognized network adapter is present

Perform "

pg.122) on the LAN device name under [Network adapters], 

then "

pg.123) on [Ethernet controller] under [Other devices]. 

Recognized 
network adapter

Unrecognized 
network adapter