Manualsbrain.com
  1. Manuals
  2. Brands
  3. Fujitsu
  4. RX200 S2
  5. User Manual

Fujitsu RX200 S2 User Manual

Download
Page of 307
166
Chapter 7  Installing Internal Options
7.2 Removing and Attaching the Top 
Cover
Remove the top cover to install internal options. Perform the following procedures to 
remove the top cover.
7.2.1 How to Remove the Top Cover
1
Open the rack door.
2
Turn off the server and peripheral devices, then unplug the power cables from 
the server.
3
Remove all cables (e.g., SCSI and LAN cables) from the server.
4
Touch a metal part of the server to discharge static electricity. 
5
Loosen the two screws on the front of the server.
• When removing or attaching the top cover, turn off the server and all peripheral             
devices.  Also  unplug  all  power  cables  from  the  server.  Failure  to  do  so  may             
cause electric shock (
• Use tip preventive stabilizers when installing the rack.
Pulling the server out of the rack without installing stabilizers may cause the            
rack to tip over.