Fujitsu RX200 S2 User Manual

202

Chapter 7 Installing Internal Options

■ Connection of Other External SCSI Options

External SCSI options with different SCSI-IDs are connected in a daisy chain as shown in the following

figure. Up to two devices can be connected.

■ Notes on SCSI Options

●

SCSI-ID Setting

Do not use the same setting for different devices.

●

Terminator

Install a terminator to the external SCSI option at the end of the daisy chain.

Alternatively, use the auto termination function of the external SCSI option.

Be sure to use the terminator supplied with a SCSI device only on that option.

●

SCSI Cable

Select the SCSI cable for connecting the SCSI device depending on usage.

table: List of SCSI Cables

Device connected

Model

Lengt

Remarks

External SCSI device

Server

External SCSI option
(half-pitch, 68-pin)

SCSI Ctrl U160 lp (PG-
130L)
(VHDCI, 68-pin)

GP5-846

2.0m

Separately
available

PRIMERGY SX10
(half-pitch, 68-pin)

SCSI Ctrl U160 lp (PG-
130L)
(VHDCI, 68-pin)

PG-CBLS007

1.8m

Separately
available

PRIMERGY SX10
(half-pitch, 68-pin)

SCSI Ctrl U160 lp (PG-
130L)
(VHDCI, 68-pin)

PG-CBLS008

5.0m

Separately
available

Hard disk cabinet PG-R1DC7
(VHDCI, 68-pin)

RAID Ctrl 2-Channel 128
MB w/ BBU (PG-142E3)
(VHDCI, 68-pin)

PG-CBLS004

2.0m

Separately
available

Hard disk cabinet PG-R1DC7
(VHDCI, 68-pin)

RAID Ctrl 2-Channel 128
MB w/ BBU (PG-142E3)
(VHDCI, 68-pin)

PG-CBLS005

5.0m

Separately
available

SCSI Cable
(External SCSI devices content)

SCSI Cable (GP5-846: Option)

SCSI Ctrl U160 lp

Terminator
(External SCSI devices content
or the auto termination function of the external SCSI device)