Fujitsu RX200 S2 User Manual
216
Chapter 8 Hardware Configuration/Utilities
8.2.6 Peripheral Configuration Submenu
Appears when [Peripheral Configuration] is selected from the [Advanced] menu.
Configures the serial port, parallel port, etc.
table: Items on the Peripheral Configuration Submenu
Item
Setting
Description
Serial
• Disabled
• Enabled
• Auto (at the time of
• Enabled
• Auto (at the time of
purchase)
Sets whether to enable or disable the serial port.
Serial Multiplexer
• System (at the time of
purchase)
• BMC
• Shared
• Shared
Changes the function of the serial port.
• System
Uses as a serial port. (Setting for UPS
connection)
connection)
• BMC
Enables the remote control function.
"Appendix C Remote Control Function and
Console Redirection" (
"Appendix C Remote Control Function and
Console Redirection" (
This value can be selected when [Serial] is set to
[Disabled].
[Disabled].
• Shared
[System] can be switched to and from [BMC]
automatically. The remote control function and
console redirection can be used together.
automatically. The remote control function and
console redirection can be used together.
Floppy Type
Local (Fixed parameter)
Sets when the internal floppy disk drive is used.
Diskette Controller
• Disabled
• Enabled (at the time of
• Enabled (at the time of
purchase)
Sets whether to enable or disable the floppy disk
controller.
controller.
Mouse Controller
• Disabled
• Enabled
• Auto Detect (at the time of
• Enabled
• Auto Detect (at the time of
purchase)
Sets whether or not to use the mouse connected to
the mouse connector.
the mouse connector.
Item Specific Help
PhoenixBIOS Setup Utility
Advanced
Serial: [Auto]
Serial Multiplexer: [System]
Floppy Type: [Local]
Diskette Controller: [Enabled]
Mouse Controller: [Auto Detect]
Serial Multiplexer: [System]
Floppy Type: [Local]
Diskette Controller: [Enabled]
Mouse Controller: [Auto Detect]
Peripheral Configuration
Select Sub-Menu
F1
Esc
Select Item
Select Menu
Change Values
-/+
Enter
Info
Exit
F9
F10
Setup Defaults
Save and Exit