Fujitsu RX200 S2 User Manual

30

Chapter 1  Overview

2

Turn the handle in the direction of the arrow and pull it forward. 

 Unless you are inserting/removing media or turning the power on/off, keep the rack door closed. Doing 

so blocks electric waves from cell phones, etc.

 Do not lose the keys. If the key is lost, contact an office listed in the "Contact Information" of the "Start 

Guide".

1.4.2 Turning On the Server

• Do not move, strike, or shake the server when it is turned on. This can damage               

the hard disk in the server and cause data loss.

• Turn the server on when the temperature is in its operating environment range            

(10-35

°C). For details on the operating environment, refer to "Start Guide" and           

"Safety Precautions".

When operating the device outside of this operating environment, the server          

may operate improperly, damage data etc.

Furthermore, Fujitsu cannot be held responsible for any related damage,         

malfunction, or loss of data, etc.

• The fans rotate at high speed immediately after the server is turned on, but this              

is not defective. When the temperature is in the server's operating environment           

range (10-35

°C), they start to rotate at normal speed later.

• Be sure to wait for 10 seconds or longer after shutdown before turning the             

server on.

Turn and then pull