Hitachi 8880R User Manual

Page of 62
 Ch 2: System Environment Setting
36
Hitachi VisionBase 8880R Server
Load Setup Defaults
Returns the setup data to the defaults. The settings in the following items are not to be changed. This function is 
equivalent to 
 key.
System Time
System Date
User Password
Administrative Password
Discard Changes
Returns the settings other than those below to the last recorded setup data. This function is equivalent to 
 key.
System Time
System Date
User Password
Administrative Password
Save Changes
Records setup data without exiting the Setup menu.
Notes on the Setup Menu
Only 3.5-inch, 720 KB or 1.44MB floppy disks must be used.
Functions related to the IDE hard disk are unsupported.
“Console Redirection” in the Advanced menu are unsupported.
ISA Configuration Utility (ICU)
The ISA Configuration Utility (ICU) is a software product that enables ISA-specification extended boards not 
conforming to Plug and Play to be used correctly in the system equipment. When you expand your system, make 
appropriate settings in the Setup Menu and use the ICU to perform configuration. The settings are stored in 
nonvolatile memory of the system equipment.
It is recommended that the user configure the ISA card first, using the ICU, before installing it in the system.
In one of the following cases, start the ICU and make settings.
When the configuration of the system equipment is changed
When checking or setting resources for various types of board controllers
If a configuration error message is displayed at power-on
NOTE: The ISA boards supported by the Hitachi VisionBase 8880R Server system equipment (PC-CH2100 and 
PC-SHT4840-IS) are incompatible to Plug and Play.
If you use values other than those recommended, evaluate such values sufficiently before use. 
Hitachi PC assumes no responsibility for any trouble caused by the use of unrecommended values.
The Hitachi VisionBase 8880R Server system equipment does not support Plug and Play compatible 
operating systems.
F9
F6