Nortel Networks NN43001-563 User Manual
System commands LD 32
385
The card reset button is only available in the TM 3.1 IP Trunk 3.01 (and
later) application when the IP trunk card is disabled.
later) application when the IP trunk card is disabled.
Disabling the IP trunk card in LD 32 does not disable the Active Leader
or Backup Leader functions.
or Backup Leader functions.
•
This temporarily prevents the IP Trunk 3.01 (and later) node from seizing
the port from incoming calls.
the port from incoming calls.
•
.
•
•
.
•
.
This command displays the PEC (Product Engineering Code) for the card.
The PEC is as follows:
The PEC is as follows:
ITG 8-port trunk card – NT0961AA
ITG-Pentium 24-port trunk card – NT0966AA
Media Card 32-port trunk card – NT0966BA
Media Card 32-port trunk card – NT0966BA
The IP trunk card ID information displays the same IP trunk card serial
number that is displayed from the ITG shell using
number that is displayed from the ITG shell using
serialNumShow
.
•
.
•
.
shows a summary of the system administration commands available
in LD 32.
Table 54
LD 32 IP Trunk 3.01 (and later) maintenance commands
LD 32 IP Trunk 3.01 (and later) maintenance commands
Command
Function
DISC l s c
Disable the indicated card, where:
l = loop, s = shelf, c = card
l = loop, s = shelf, c = card
DISI l s c
Disable the indicated card when idle, where:
l = loop, s = shelf, c = card
l = loop, s = shelf, c = card
Use the DISI command to disable the IP trunk
card instead of the DISC command. The
disablement of the IP trunk card is indicated by
the NPR011 message.
card instead of the DISC command. The
disablement of the IP trunk card is indicated by
the NPR011 message.
DISU l s c u
Disable the indicated unit, where:
l = loop, s = shelf, c = card, u = unit
l = loop, s = shelf, c = card, u = unit
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563
02.01
Standard
Release 5.5
21 December 2007
Copyright © 2007, Nortel Networks
.