Nortel Networks 555-4001-135 User Manual

Use the Add Members button at the top of the Group Members table 
to add a member to the group (see 

).

The right side of the window displays the group’s properties for 
outcalling retries. These settings apply only to members with the option 
“Wait for Confirmation” activated. Table 31 describes these parameters 
which are view only. Click on the Modify button to open a window in 
which these settings can be changed (see 

Add Members – Click on the Add Members button in the Call-Out 
Groups Details window to open the Add Members window. Use the Add 
Members window to add one or more members to an existing group 
(see 

Checkboxes

Click on a check box to select a member of the group. The Delete button at the 
bottom of the window can then be used to delete the group member. Before 
deleting the group, the system displays the following dialog box, for example: 
“Are you sure you want to delete these five members?”

 

 

Wait time for 
answer

The number of seconds to wait for the called party to answer when calling 
numbers in this group.Time is measured from call origination, so it includes the 
dialing and ringing stages. An answer here, refers to the DTMF * keypad press.

 

Range: 15-90 seconds.

 

Default: 30 seconds.

Number of call 
attempts

The number of times to try each number in case of failure. Value 1 means only 
1 attempt, no retries.

 

Range: 1-3.

 

Default: 1.

Time interval 
between attempts

The number of seconds the system waits, before retrying the same number.

 

Range: 5-30 seconds.

 

Default: 10.