Nortel Networks 1000M User Manual

 Powering up the system and initial loading

NN43021-310

Standard 02.01

December 2007

Clear the display and minor alarms on both Cores:

Test the clocks:

Verify that the clock controller is assigned to the active Core:

Verify that the Clock Controllers are switching correctly:

Check applications (CallPilot, Symposium, Meridian Mail, and so on.).

10 Check dial tone.

Check the system monitors

Exit program

Load program

Clear displays on the cores

Clear major alarms

Clear minor alarms

Load program

Get status of the clock controllers (x is “0” or “1” 
for Clock 0 or Clock 1)

Switch the Clock (if necessary)

Exit program

Switch Clock

(Wait 30 seconds)

Switch Clock again