Nortel Networks NN43001-121 User Manual
Network configuration
41
provides an example of a
multiple customer network. The figure shows two customers: Customer 1
(Ottawa) and Customer 2 (Belleville), each with their own set of associated
phones and Signalling Servers. This type of configuration is required for any
deployment that uses the Telephony Gateway and Services functionality,
or in scenarios where both Telephony Gateway and Services and Remote
Call Control functionality is deployed.
(Ottawa) and Customer 2 (Belleville), each with their own set of associated
phones and Signalling Servers. This type of configuration is required for any
deployment that uses the Telephony Gateway and Services functionality,
or in scenarios where both Telephony Gateway and Services and Remote
Call Control functionality is deployed.
Figure 13
Multiple customer network
Multiple customer network
The Signaling Server for Customer 1 is in the domainOne.com domain.
For each customer, you must configure a separate Office Communications
Server domain. The Office Communications Server domain used by
Customer 1 is in the same domain as the Signaling Server domainOne.com.
Each OCS domain requires a separate Active Directory.
For each customer, you must configure a separate Office Communications
Server domain. The Office Communications Server domain used by
Customer 1 is in the same domain as the Signaling Server domainOne.com.
Each OCS domain requires a separate Active Directory.
The only equipment that Customer 1 and Customer 2 share is the CS 1000
and the NRS. The NRS can only be shared by the two customers if it is
configured with both domainOne.com and domainTwo.com.
and the NRS. The NRS can only be shared by the two customers if it is
configured with both domainOne.com and domainTwo.com.
Nortel Communication Server 1000
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
NN43001-121
01.03
Standard
Release 5.0
30 April 2008
Copyright © 2005–2008, Nortel Networks
.