Nortel Networks 3500 User Manual

Page of 342
2-146   Operation, administration, and maintenance (OAM) features
OPTera Metro 3500 Multiservice Platform    NTRN10AN    Rel 12.1   Standard   Iss 1   Apr 2004
Engineering rules
The following engineering rules apply to the STS-1 managed DSM feature:
OPTera Metro 3500 shelves equipped with STX-192 circuit packs (in slots 
13 and 14) only supports STS-1 managed DS1 facilities.
OPTera Metro 3500 shelves equipped with VTX-series circuit packs (in 
slots 13 and 14) support both VT and STS-1 managed DS1 facilities.
STS-Managed DS1 facilities do not support individual Connection IDs, 
instead the STS1 cross connection can be assigned a Connection ID.
Site Manager will support:
— STS-managed circuits.
— VT managed circuits.
— mix of STS & VT managed circuits.
STS-1 managed DSM provisioning data will survive:
— upgrades
— SPx replacement
— Save and Restore operations
You can not provision an STS1 cross connect between DS3 circuit pack to 
an STS-1 managed DSM.
You can not provision DS1 facilities on DS1 DSM to DS1 facilities on 
channelized DS3 circuit pack using a single STS1-level bandwidth 
management command. The channelized DS3 circuit packs is 
VT-managed which is not supported by the STS-managed STX-192 circuit 
pack.
Support for 12 DSM 
OPTera Metro 3500 Release 12.0 and higher supports 12 protected or 
unprotected DSMs. The DSM units could be configured as:
STS managed only (with STX-192 circuit pack in slots 13 and 14).
STS managed only (with VTX-series circuit packs in slots 13 and 14).
STS or VT Managed combination (with VTX-series circuit packs in slot 
13 and 14).
VT managed only (with VTX-series circuit packs in slots 13 and 14 only).
Synchronization
SONET-based equipment derives many of its basic attributes from 
synchronous operation. Synchronization is required in networks that contain
add/drop multiplexers (ADMs)
synchronous tributaries