Nortel Networks 3500 User Manual
2-6 Operation, administration, and maintenance (OAM) features
OPTera Metro 3500 Multiservice Platform NTRN10AN Rel 12.1 Standard Iss 1 Apr 2004
audible and visible office alarm outputs). The network element, whether the
alarm point is disabled or enabled, records all alarms when the conditions that
cause an alarm occur.
alarm point is disabled or enabled, records all alarms when the conditions that
cause an alarm occur.
Alarms are not lost after they are activated, whether enabled or disabled, and
can be retrieved when they are enabled. OPTera Metro 3500 stores a maximum
of 3000 active alarms, including both enabled and disabled alarms. The Active
Alarms window of Site Manager does not identify active disabled alarms. You
can retrieve a list of all disabled alarms from the Alarm Provisioning window,
by clicking the Alarms on Disabled Points tab.
can be retrieved when they are enabled. OPTera Metro 3500 stores a maximum
of 3000 active alarms, including both enabled and disabled alarms. The Active
Alarms window of Site Manager does not identify active disabled alarms. You
can retrieve a list of all disabled alarms from the Alarm Provisioning window,
by clicking the Alarms on Disabled Points tab.
Alarm profiles allow you to enable or disable defined groups of alarm points.
These groups are defined as Alarm classes. Alarm points are grouped by
facility type or equipment.
These groups are defined as Alarm classes. Alarm points are grouped by
facility type or equipment.
Each group of alarm points has two profiles defined by the system: All Alarms
ON and All Alarms OFF. At start-up, every group of alarm points has a default
profile of All Alarms ON, which becomes the active profile. You can
ON and All Alarms OFF. At start-up, every group of alarm points has a default
profile of All Alarms ON, which becomes the active profile. You can
create up
to three profiles for any group of alarm points. Each profile has a distinct name
and contains status information for each alarm or event that applies to that
profile. Profile names can contain an ASCII string of up to 20 characters that
cannot include quotation marks (“) or backslashes (\).
and contains status information for each alarm or event that applies to that
profile. Profile names can contain an ASCII string of up to 20 characters that
cannot include quotation marks (“) or backslashes (\).
You can create, edit, and delete profiles. You can change all profiles, except the
two profiles defined by the system. However, you cannot delete or edit a profile
that is set as the default profile, or edit or delete the active profile if it is in use.
A new profile can be added to take care of additional requirements.
two profiles defined by the system. However, you cannot delete or edit a profile
that is set as the default profile, or edit or delete the active profile if it is in use.
A new profile can be added to take care of additional requirements.
Alarm flow control
When a major fault occurs within a network, significant numbers of alarms are
raised on each shelf processor over a sustained period of time. The alarm flow
control (AFC) feature avoids situations in which Site Manager sessions log out
automatically due to TL1 request timeouts.
raised on each shelf processor over a sustained period of time. The alarm flow
control (AFC) feature avoids situations in which Site Manager sessions log out
automatically due to TL1 request timeouts.
If the alarm rate is four alarms / second or greater, in a given ten minute period,
then this condition is considered excessive alarming and the ‘Alarm and Event
Throttling Active’ alarm is generated to warn users that further alarms will not
be reported.
then this condition is considered excessive alarming and the ‘Alarm and Event
Throttling Active’ alarm is generated to warn users that further alarms will not
be reported.
When the system initiates alarm flow control, applications can continue to
generate alarms. The AFC feature only disables the reporting of alarms to the
screen or to file. User-initiated retrievals will continue to display all the alarms.
generate alarms. The AFC feature only disables the reporting of alarms to the
screen or to file. User-initiated retrievals will continue to display all the alarms.
When the number of alarms being generated falls below the provisioned
threshold, the ‘Alarm and Event Throttling Active’ alarm is cleared and alarm
reporting resumes.
threshold, the ‘Alarm and Event Throttling Active’ alarm is cleared and alarm
reporting resumes.