Microsoft 2004 User Manual
Disable the Access Rules created by the Network
Template
Template
The next step is to disable the Access Rules created by the Network Template. In this
example, we disable the Access Rules created by the 3-Leg perimeter template. You can
perform a similar procedure if you used the Front-end firewall Network Template. We want to
use these rules later, so we will disable the rules instead of deleting them. Later, we will re-
enable the Access Rules created by the Network Template.
example, we disable the Access Rules created by the 3-Leg perimeter template. You can
perform a similar procedure if you used the Front-end firewall Network Template. We want to
use these rules later, so we will disable the rules instead of deleting them. Later, we will re-
enable the Access Rules created by the Network Template.
Perform the following steps to disable the Access Rules created by the Network Template:
1. At the ISA Server 2004 firewall computer, open the Microsoft Internet Security and
Acceleration Server 2004 management console and expand your server name in the left
pane of the console. Click on the Firewall Policy node.
pane of the console. Click on the Firewall Policy node.
2. In the Details pane, click on the first rule created by the Network Template Wizard. Hold
down the CTRL key on the keyboard and click the second rule created by the Wizard.
Notice that both rules are now highlighted. Right click the highlighted rules and click
Disable.
Notice that both rules are now highlighted. Right click the highlighted rules and click
Disable.
3. Click
Apply to save the changes and update the firewall policy.
4. Click
OK in the Apply New Configuration dialog box.
ISA Server 2004 Configuration Guide 135