Microsoft 2004 User Manual

Page of 263
ISA Server 2004 Configuration Guide 91 
Introduction 
The ISA Server 2004 firewall comes with a number of pre-built Network Templates you can 
use to automatically configure Networks, Network Rules and Access Rules. The Network 
Templates are designed to get you started quickly by creating a base configuration on which 
you can build. You can choose from one of the following Network Templates: 
•  Edge Firewall 
The Edge Firewall Network Template is used when the ISA Server 2004 firewall has a 
network interface directly connected to the Internet and a network interface connected to 
the Internal network 
•  3-Leg Perimeter 
The 3-Leg Perimeter Network Template is used when you have an external interface, 
Internal interface and a perimeter network segment (DMZ) interface. This template 
configures the addresses and relationships between these networks.  
•  Front Firewall 
The Front Firewall Template is used when the ISA Server 2004 firewall serves as a front-
end firewall in a back-to-back firewall configuration. 
•  Back Firewall 
The Back Firewall Template is used when the ISA Server 2004 firewall is located behind 
another ISA Server 2004 firewall, or a third-party firewall. 
•  Single Network Adapter 
The Single Network Adapter Template is a special configuration that removes the ISA 
Server 2004 firewall’s network firewall capabilities. Instead, the Single Network Adapter 
template configures the machine as a unihomed Web caching server. 
In this ISA Server 2004 Configuration Guide document, we outline the procedures to carry 
out two scenarios: 
•  Scenario 1: The Edge Firewall Configuration 
•  Scenario 2: The 3-Leg Perimeter Configuration 
You only need to go through the section that applies to your current setup. If you followed the 
complete instructions in the first chapter of this guide, then you should perform the 
procedures in the second scenario. Otherwise, you can use the procedures provided in the 
first scenario.