Polycom 1725-36028-001 User Manual

 

Feature Programming  
(no Softkeys) 

If your system is utilizing any SpectraLink Wireless Telephones that 
do not have softkeys (PT800 series or earlier), 

 is 

used to allow these handsets to access system features. 
Mute and optional OAI (Open Application Interface) must be 
programmed in the 

 screen for both analog and 

digital systems.  
In digital systems, feature programming is done in the PBX. These 
features are also programmed into the handsets according to the 
directions outlined in the LinkPlus Interface Guide for your PBX.  
In analog systems, the 

 screen is used to 

program special features. With Feature Programming you can access 
special features by pressing the 

 key on the handset followed by 

another key. This shortcut is called a “macro”. You may define 
macros for the digits 

-

, 

, 

, and 

. After programming, when you 

press 

 followed by a digit or character, you will have access to the 

associated feature. 
The feature programming settings are usually the same for every 
SpectraLink 8000 Telephony Gateway. Note that the settings done on 
one SpectraLink 8000 Telephony Gateway as described below should 
be done on the rest of the SpectraLink 8000 Telephony Gateways 
sharing the same PBX so that all handsets have access to the same 
special features. 

You must use this screen to program all analog features and to 
program the 

 function to

 in all analog and digital 

systems.  

PN: 1725-36028-001_T.doc 

 

73