Polycom 1725-36028-001 User Manual

SpectraLink 8000 Telephony Gateway Administration Guide 

The 

 option allows the system administrator to add and delete 

handsets via another handset, rather than via the SpectraLink 8000 
Telephony Gateway. Any function key sequence may be programmed 
to 

 by typing ADMIN next to the desired key. The ADMIN 

feature may be programmed on only one SpectraLink 8000 Telephony 
Gateway (the one that contains the line used by the system 
administrator) in order to limit its accessibility system-wide. 
When the ADMIN function is active, pressing the function key 
sequence on the handset will open the ADMIN function. The 
following steps allow the administrator to add or delete a handset: 
1.  Press 

 plus the assigned key. Once in the ADMIN function, 

pressing the 

 key will cancel the action and return to the 

previous menu level. 

2.  Enter the SpectraLink 8000 Telephony Gateway password using 

the handset keypad. Note that the password is case sensitive. The 
key steps through each letter and number as it is repetitively 
pressed. 

3.  Once the password is accepted, the SpectraLink 8000 Telephony 

Gateways are listed. Use the arrow keys to scroll through the list. 
Press 

 (the zero key) to select the correct SpectraLink 8000 

Telephony Gateway. 

4.  The handsets assigned to the selected SpectraLink 8000 Telephony 

Gateway are listed by the last three byte numbers in the MAC 
address. If a line is not assigned to a handset, not used will 
display. Use the arrow keys to scroll through the lines. 

5.  Display the line to add or delete a handset and follow the prompts 

displayed on the handset. 

6.  If a name or extension must be associated with an added handset 

for record keeping purposes, it must be entered on the 
SpectraLink 8000 Telephony Gateway 

 screen. 

76 

PN: 1725-36028-001_T.doc