Polycom 1725-36028-001 User Manual

 

Softkey and Shortcut Key 
Programming 

The softkeys on the SpectraLink e340/h340/i640 and 8020/8030 
Wireless Telephones enable quick access to system features. The 
softkey programming screen establishes the correspondence between 
the PBX features, the softkeys, and the shortcut keys.  
There are 16 possible features displayed in the four levels of the 
softkey function display area. The default softkeys are at level 0 
(zero). The end user scrolls through the softkey display levels by 
pressing the 

 key to move to the next level. The softkeys are 

labeled A, B, C, and D and their corresponding display areas on the 
handset are shown below.  

 

The handset emulates a specific deskset in your vendor’s PBX system. 
See the LinkPlus Interface Guide for your system for emulation 
information.  
The shortcut keys are 

-

, 

, 

, and 

. Any shortcut key may be 

pressed by the user while scrolling through the softkeys or while in 
the shortcut menu to activate a feature. The feature will activate 
whether or not that feature is currently displayed or highlighted.  
The sample screens on the next page illustrate the programming 
required. The levels are on the left side of the screen and are labeled 

, 

, 

, and 

. The softkeys are labeled 

, 

, 

, and 

. 

The Softkey Function display area displays level 0 features by 
default. Therefore Level 0 softkey features are sometimes not 
assigned a shortcut key, as they are readily available.  

Use the following screen and the table to construct your 
correspondences. 

PN: 1725-36028-001_T.doc 

 

81