Polycom DOC2559B User Manual

Page of 65
Polycom RMX 4000 Hardware Guide
2-13
5
Carefully slide the MPM+/MPMx card out through the front panel.
Installing the Replacement MPM+/MPMx Card
1
On the card to be installed, move the ejector levers to their fully open 
position.
2
Slide in the replacement MPM+/MPMx card.
3
Push the MPM+/MPMx card firmly into the Backplane, making sure 
it is properly seated in its slot.
4
Ensure that the metal ejector levers are fully retracted into their 
housings.
5
Tighten the captive screws on the front panel of the RMX that secure 
the MPM+/MPMx card to the chassis.