Polycom 14117800 User Manual

  KIRK Handset Registration and Subscription    147

KIRK Wireless Server 600v3 Installation and Configuration Guide

In the Long Name field, type any name. It is recommended to type the same 

information as in the Name field (see step 4 below).

In the Name field, type SEP followed by the IPEI number of the handset.
The serial number (IPEI number) consists of a five-digit handset type (manufacturer 

code) and a seven-digit handset number.
For more information about retrieving the IPEI number (serial number), refer to 

For more general information about the IPEI number (serial number), refer to 

.

In the Number field, type a number (e.g. 320).

The number must be unique. It is recommended to type the local number used 

in the CallManager.

In the Auth. Name field, enter the auth. name (SIP and H323 only).

In the Password field, enter the password (SIP and H323 only).

In the Display Text field, type a standby text (max. 36 characters) to be displayed 

when the handset is on hook.

In the IPEI field, type the IPEI number of the handset.

In the Auth. Code field, type the authentication code (AC) (optional).
The authentication code is a subscription password of a maximum eight digits, 

defined by the technicians, and can be used when connecting the handset to the 

KWS600v3. The authentication code is a subscription pin code for the individual 

handset.

Entering authentication code overrides the AC setting defined for the Master 

KWS600v3 under Configuration/DECT/System on the Administration Page.

Click Apply.

Repeat step 1 to 9 for each new handset to be registered to the system.

Click OK to save the registration(s).
In the DECT/Users page the new handset/user now has the status Pending, meaning 

that it is ready for subscription.

8.1.2  Registering Handsets Using H.323 Protocol

Under Administration menu, click DECT, and then click Users.
The following window appears.