Polycom 14117800 User Manual
166
System Management
14117800, Ed.2.6
1
Under the Configuration menu, click General, and then click admin.
Figure 96
Adm. Page: Configuration/General/Admin/Change Password page
2
In the User name field, type a user name.
3
In the Password field, type a new password, then type the password again in the field
below to confirm it.
4
Click OK to change the password.
10.1.2 Reading System Information
This page provides general system information.
1
Under the Configuration menu, click General.
Figure 97
Adm. Page: Configuration/General/Info page
On the General/Info page you can read information about:
•
the used firmware, boot code and hardware
•
Serial number; Mac Address of the system
•
Coder
•
SNTP Server; from which IP address the system receives its time information