Panasonic FP User Manual
Additional Information
FP Web-Server V2.11
162
15.3 PLC Connection, Cable Drawings, Modem
Please also see the installation sheet " FPWEB_Server_Leaflet" supplied with
your FP Web-Server for important notes, cables and installation.
your FP Web-Server for important notes, cables and installation.
To connect and wire to an Ethernet, please refer to "Setup of an Individual Ethernet LAN (see
page 168)".
page 168)".
15.3.1 PLC Connection
Cables for the FP Web-Server:
24V DC, use Panasonic power cable
(order number: AFP0581)
brown = +24V DC
blue = GND
blue = GND
green = framing ground
Note: The green wire MUST be connected to FG!
Ethernet 10-Base-T / 100-Base-Tx (RJ45)
use Standard Ethernet CAT.5
use Standard Ethernet CAT.5
RS232C (without handshake)
Screw terminal (Phoenix 18 40 37 9)
connects to the PLC
Screw terminal (Phoenix 18 40 37 9)
connects to the PLC
2nd RS232C (Sub-D 9 pin male)
compatible to IBM PC serial port
Use standard serial computer cables.
1. connects to a modem (PPP) or
2. transparent communication with second
PLC, computer, panel... etc.
compatible to IBM PC serial port
Use standard serial computer cables.
1. connects to a modem (PPP) or
2. transparent communication with second
PLC, computer, panel... etc.