Panasonic FP User Manual
FP Web-Server V2.11
15.7 Troubleshooting
173
4. Verify the FP Web-Server configuration in the FP Web-Configurator Tool
under “Config”
If a static IP address setup should be used (private network or cross-over cable)
Check the IP address settings of your computer and the FP Web-Server configuration.
1. Under "Settings / Network Connections", open the properties dialog of the
computer's Ethernet/LAN card
2. Open the “Internet Protocol (TCP/IP)” properties dialog
The “Subnet mask” setting should be the same as with your FP Web-Server
configuration. Also the left part of the “IP address” (identified by the 255 value in the
configuration. Also the left part of the “IP address” (identified by the 255 value in the