Panasonic FP User Manual
FP Web-Server V2.11
6.1 Email Functions of the FP Web-Server
57
The communication parameters for RS232C to the PLC for email handling is defined in
Configurator's tab "Config".
Configurator's tab "Config".
Open the "Email" tab in the Configurator for all further settings:
"Email sending enable":
This setting is used to turn the email function of the FP Web-Server on or off. Disable this
checkbox if the email function is not used. This saves the FP Web-Server's memory.
checkbox if the email function is not used. This saves the FP Web-Server's memory.
[Email Server]
Refer to the online help under the keyword Email Server Settings for detailed information.
"Email server address":
The name of the server or the IP address configured in the Email Server Settings dialog is
shown here.
shown here.
"Email sender address":
The email sender's address (email address of the PLC, i.e. the FP Web-Server) is defined here.
It must be known to the SMPT email server.
It must be known to the SMPT email server.
Always enter the email sender's address without <> characters!
Japanese characters are not allowed, nor are ASCII characters that contain umlauts.
[Internet Email: Dial-up and ISP settings]
For detailed information refer to the section Internet Email Settings (see page 130).