Quatech HD500 User Manual
Quatech, Inc.
AirborneDirect™ User Manual
20
2/21/2011
100-8510-110
Pin
RJ45 Socket (Industrial)
RJ45 Plug (Enterprise)
8
NC
NC
Green LED
Valid TCP/IP connection made with
Airborne Adapter:
Off No TCP/IP connection
On Valid TCP/IP Connection
N/A
Yellow LED
Power-on Self Test (POST):
Off Not powered or has failed POST
On Passed POST
N/A
6.3
Connector Definition
There are a total of five connectors used by the AirborneDirect
™ family. Which
connectors are available on your product depend upon the model you purchased.
The definition for the connectors is common to all product classes. Table 4
provides definitions for the connectors.
The definition for the connectors is common to all product classes. Table 4
provides definitions for the connectors.
Table 4 - Connector Description
Type
Description
Product Class
Serial
DE-9 Connector Male
Enterprise, Industrial
Ethernet
RJ45 Plug
Enterprise
Ethernet
RJ45 Socket
Industrial
Antenna
RP-SMA
Enterprise, Industrial
Power
2.1mm Barrel Jack
Enterprise, Industrial
Power
2 Position Terminal Block
Industrial
6.4
OEM Reset Switch (Factory Reset)
All AirborneDirect
™ devices support the ability to reset the configuration back to
OEM defaults. This is useful when a device has been incorrectly configured and
has lost the ability to communicate on any of the available ports, preventing
access to one of the configuration interfaces and blocking your ability to recover
the device by correcting the configuration.
has lost the ability to communicate on any of the available ports, preventing
access to one of the configuration interfaces and blocking your ability to recover
the device by correcting the configuration.
The following Table 5 describes the sequence for OEM resetting the
AirborneDirect
AirborneDirect
™ devices. All devices use the same process however the
loo0cation of the OEM reset switch varies between the product families.