Intel SE7500WV2 User Manual
20
Intel Server Board SE7500WV2 Product Guide
Table 4.
Software Security Features (continued)
Feature Description
Control access to the
system other than SSU:
set user password
system other than SSU:
set user password
To control access to using the system, set a user password and enable it
through Setup.
through Setup.
To disable a password, change it to a blank entry or press CTRL-D in the
Change Password menu of the User Password Option menu found in the
Security Subsystem Group.
Change Password menu of the User Password Option menu found in the
Security Subsystem Group.
To clear the password if you cannot access Setup, change the Clear Password
jumper (see Chapter 6).
jumper (see Chapter 6).
Boot without keyboard
The system can boot with or without a keyboard. During POST, before the
system completes the boot sequence, the BIOS automatically detects and tests
the keyboard if it is present and displays a message.
system completes the boot sequence, the BIOS automatically detects and tests
the keyboard if it is present and displays a message.
Specify the boot
sequence
sequence
The sequence that you specify in setup will determine the boot order. If secure
mode is enabled (a user password is set), then you will be prompted for a
password before the server fully boots. If secure mode is enabled and the
“Secure Boot Mode” option is also enabled, the server will fully boot but will
require a password before accepting any keyboard or mouse input.
mode is enabled (a user password is set), then you will be prompted for a
password before the server fully boots. If secure mode is enabled and the
“Secure Boot Mode” option is also enabled, the server will fully boot but will
require a password before accepting any keyboard or mouse input.