Manualsbrain.com
  1. Manuals
  2. Brands
  3. Toshiba
  4. Satellite R10
  5. User Manual

Toshiba Satellite R10 User Manual

Download
Page of 384
4.16 LCD harness holder  
4 Replacement Procedures  
4-40 
 
Satellite R10 Maintenance Manual  (960 -509)  
Installing the LCD harness holder 
The following describes the procedure for installing the LCD harness holder (See Figure 
4-26). 
1.   Install the LCD harness holder to the cover assembly by fitting the boss and 
secure it with the following  screws . 
? 
M2.0x6.0B  
FLAT BIND screw 
 
 
 
 
x2 
2.   Connecting the QI board cable  to the connector CN9521  on the CN board and to 
the connector CN9530 on the QI board, arrange  the QI board cable along the 
guide of LCD harness holder. 
3.   Connecting the CN board harness  to the connector CN9502 on  the system board 
and to the connector CN9520 on the CN board, arrange the CN board harness 
along the guide of LCD harness holder. 
NOTE: Wh en connecting the CN board harness, make sure that the connector with 
core side is connected to the CN board. 
4.   Connect the LCD harness to the connector CN5501  on the system board and 
arrange the LCD harness along the guide of LCD harness holder. 
5.   Connecting the USB harness to the connector CN4612  on the system board and 
to  the connector CN4621 on the CN board, arrange the USB harness along the 
guide of LCD harness holder.