Spectralink 1738 User Manual

6   

R

EFERENCE

 & I

NSTALLATION

 M

ANUAL

 

  

Using a touch-tone telephone, users can arm or disarm their
security system from a distance as well as activate or
deactivate the APR3-ADM2’s on-board PGM output. Due to its
Auto-panel Recognition feature, modules with the APR- prefix
are compatible with Spectra (versions 2.0 and higher) and
Digiplex. Modules with the APR3- prefix are compatible with
Spectra( versions 2.0 and higher), Digiplex and DigiplexNE. 

Connected to the Spectra control panel’s communication bus,
the fully supervised zone expansion modules provide you with
up to 4 (SPC/APR3-ZX4) or up to eight (SPC/APR3-ZX8)
additional hardwired inputs and one normally open 50mA PGM
output (SPC/APR3-ZX8 only). Due to its Auto-panel
Recognition feature, a module with the APR- prefix is
compatible with Spectra (versions 2.0 and higher) and
Digiplex. Modules with the APR3- prefix are compatible with
Spectra( versions 2.0 and higher), Digiplex and DigiplexNE. 

Connected to the Spectra control panel’s communication bus,
the fully supervised Wireless Bus Module (SPC-319) allows
you to add up to eight fully programmable remote controls and
up to eight Liberator Wireless Detectors and Contact Switches
(door contacts). The SPC-319 also provides one
programmable 5A relay (PGM). A second 5A programmable
relay (PGM) is available as an option. 

In areas where security system monitoring is not available, let
the sophisticated Paravox voice dialer take over. Compatible
with any control panel, the Paravox will verbally report system
status by phone, advising of detection of burglary, fire, flood or
any other situation programmed to generate a report condition.
Fully programmable over the telephone (no external keypad
required), the Paravox guides the end user through all system
functions with a full set of voice prompts. All the user needs to
remember is their P.I.N. The “Key Ahead” feature eliminates
the frustration and time wasted for experienced operators by
allowing them to key-in selections before a prompt ends.

The Paradox Digigard

 (50/60/70) digital motion detectors

can immediately identify the signal produced by a moving
human body and will not be triggered by any other occurrences
in the protected area. False alarms are virtually eliminated.
Using 100% digital detection technology and smart digital
processing software leaves no room for error. With the
Digigard 70, animal lovers can maximize their security
protection. Thanks to the unique design of the patent-pending
Digigard “pet-friendly” lens and dual “decision” optics, the
Digigard 70 double-checks every movement signal. 

Take all that’s good about infrared digital detection, add an
advanced microwave “supervisor” and you have Digital Vision
motion detectors. Once the Vision’s digital infrared detector
identifies an intruder, its microwave sensor must confirm the
presence of movement before an alarm is triggered.