Kodak i800 Series User Manual

 

 

3-2 

A-61169  July 2003 

The five buttons at the bottom of the Control Panel correspond to the 
icons above the buttons To activate the icons, press the corresponding 
button. 

  

The scanner can only be enabled from the host computer. When the 
scanner is enabled, you can change the image address level, override the 
elevator setting and use the programmable keys. When enabled, the 
icons on the Operator Control Panel will look like this: 

 

These functions can be performed when the scanner is enabled: 

 

Increments the image address level. Depending on the image 
address level the icon may appear as follows:  

 

 

indicating the next image address is level 3 

 

 

indicating the next image address is level 2 

 

 

indicating the next image address is level 1 

 

Lowers the elevator tray if it is not already in the lowest position. 

 

Performs the first programmable function. 

 

Performs the second programmable function. 

 

Performs the third programmable function. 

NOTE:  Programmable keys are set-up during application setup. Check 

with your system administrator for the function of each 
programmable key.  Possible programmable key assignments 
are as follows: 

• 

No scanner functionality (default) 

• 

Scanner End-of-Job 

• 

Terminate Batch 

• 

Omit Multi-feed Detection on Next Document 

• 

Omit Printing on Next Document 

• 

Omit Patch Reading on Next Document 

Icons 

Control panel 
buttons