Kodak i800 Series User Manual

 

 

3-12 

A-61169  July 2003 

4.  Select Return. 

   

5.  Use the up and down arrows to select the desired SCSI termination 

setting. 

6.  Select Return. 

7.  Turn the scanner off. Wait at least 10 seconds and turn the scanner 

back on again. The new termination setting will take effect. 

This setting allows you to select a position of the elevator tray. Elevator 
positions can be set to accommodate 25-, 250-, 500-, 750- or 1000-
documents (20-lb bond paper). The position will remain as selected 
unless the Override Elevator icon (

) is selected. 

NOTE:  The setting of 25 should be used for manual or continuous feed 

operation. 

To set the elevator tray position:  

1.  Select the Diagnostics Settings menu 

 icon. 

2.  Use the right or left arrow to navigate to the Settings function. 

3.  Press the down arrow until Set elevator position is displayed on the 

Operator Control Panel.