Kodak 3000DSV-E User Manual

A-61371   September 2004

B-1

This system offers two types of settings:

• User settings that are set up by the operator from the control panel.

• System settings that are set up and can be changed by the Kodak 

Service Representative.

Following is a list of factory settings:

NOTE: When any of these functions has been changed and you want to 

store the new setting in the system’s memory, press the 
Memory Input key.

Exposure mode

Auto

Print image density

Center

Paper size

Letter (A4)

Print position

Center

Film type

Auto

Auto Skew Correction

ON

Auto Masking

ON

Manual Masking

-

Enabled only when the Manual 
Masking Kit (option) is mounted.

Centering/Fit

OFF

Auto Reset

Enabled

Disabled

Enabled

Setting changes made to the control panel that are not 
used within 60 seconds of being input are 
automatically cancelled and the system reverts back to 
the original settings.

Auto power save 
(PR mode only)

Disabled

30 min.
60 min.

Disabled

Turns the printer’s fuser off if the system is left idle for 
a specific period of time.
NOTE:230V units operate on a 30-minute Auto Power 

Save setting.

Auto Projection Lamp OFF

Disabled

30 min.
60 min.

Disabled

Turns the projection lamp off if the system is left idle for 
a specified period of time.

Fine mode contrast select

Contrast 

Emphasis

Outline 

Emphasis

Contrast 

Emphasis

Applies the following functions as required:
Contrast Emphasis: applied when film contains text 
that is poorly contrasted against its background 
making it difficult to read.
Outline Emphasis: applied when film contains blurred 
black-and-white images.

Auto Skew Correction 
Retain

Retained

Not Retained

Not 

Retained

Determines whether or not to retain the original 
(uncorrected) skew of a screen image after the print 
has been made.