Honeywell 1450g User Manual

Decode only those bar codes with a count of 15 characters.

Min. length = 15Max. length = 15

For a value other than the minimum and maximum message length defaults, scan the bar codes included in the explanation of 
the symbology, then scan the digit value of the message length and Save bar codes on the 

 inside the back 

cover of this manual.  The minimum and maximum lengths and the defaults are included with the respective symbologies.

Start/Stop characters identify the leading and trailing ends of the bar code. You may either transmit, or not transmit Start/

Stop characters.  Default = Don’t Transmit.

Codabar check characters are created using different “modulos.”  You can program the scanner to read only Codabar bar 
codes with Modulo 16 check characters.  Default = No Check Character.

No Check Character indicates that the scanner reads and transmits bar code data with or without a check character.

When Check Character is set to Validate and Transmit, the scanner will only read Codabar bar codes printed with a check 
character, and will transmit this character at the end of the scanned data.

When Check Character is set to Validate, but Don’t Transmit, the unit will only read Codabar bar codes printed with a 

check character, but will not transmit the check character with the scanned data.