Honeywell 1450g User Manual
1 - 1
1
Getting Started
About This Manual
This User’s Guide provides installation and programming instructions for the Voyager™ 1450g corded area-imaging scanners
and Voyager 1452g cordless area-imaging scanners. Product specifications, dimensions, warranty, and customer support infor-
mation are also included.
and Voyager 1452g cordless area-imaging scanners. Product specifications, dimensions, warranty, and customer support infor-
mation are also included.
Note: The selections in this User’s Guide are dependent on the Voyager 145Xg model you have purchased.
PDF and 2 dimensional bar codes can only be read by model 145Xg2D and cannot be read by model 145Xg1D.
Honeywell bar code scanners are factory programmed for the most common terminal and communications settings. If you need
to change these settings, programming is accomplished by scanning the bar codes in this guide.
to change these settings, programming is accomplished by scanning the bar codes in this guide.
An asterisk (*) next to an option indicates the default setting.
Unpacking Your Device
After you open the shipping carton containing the product, take the following steps:
•
Check for damage during shipment. Report damage immediately to the carrier who delivered the carton.
•
Make sure the items in the carton match your order.
•
Save the shipping container for later storage or shipping.
Connecting the Device
Connecting with USB
A scanner or a cordless base can be connected to the USB port of a computer.
1. Connect the appropriate interface cable to the device first, then to the computer.
Corded Voyager 1450g
USB Connection:
USB Connection: