Honeywell 1450g User Manual

When Required is scanned, the scanner will only read UPC-A bar codes that have addenda.  You must then turn on a 2 or 

5 digit addenda listed on 

.  Default = Not Required.

When this feature is on, there is a space between the data from the bar code and the data from the addenda.  When turned 

off, there is no space.  Default = On.

Use the following codes to enable or disable UPC-A and EAN-13 with Extended Coupon Code.  When left on the default setting 
(Off), the scanner treats Coupon Codes and Extended Coupon Codes as single bar codes.  

If you scan the Allow Concatenation code, when the scanner sees the coupon code and the extended coupon code in a single 
scan, it transmits both as separate symbologies.  Otherwise, it transmits the first coupon code it reads.  

If you scan the Require Concatenation code, the scanner must see and read the coupon code and extended coupon code in a 

single read to transmit the data.  No data is output unless both codes are read. Default = Off.