Honeywell 1450g User Manual

3. If you are connecting a CCB01-010BT Base, make sure the cables are secured in the wireways in the bottom of the 

cordless base and the base sits flat on a horizontal surface. 

4. Plug the serial connector into the serial port on your computer.  Tighten the two screws to secure the connector to the 

port.

5. Once the scanner or cordless base has been fully connected, power up the computer.

This interface programs 115,200 baud, 8 data bits, no parity, and 1 stop bit. 

A scanner or cordless base can be connected for an IBM POS terminal interface.

1. Connect the appropriate interface cable to the device, then to the computer.