Honeywell 1450g User Manual

Scan the Hands Free Time-Out bar code, then scan the time-out duration (from 0-300,000 milliseconds) from the inside back 
cover, and Save.   Default = 5,000 ms.

This sets the time period before the scanner can read the same bar code a second time.  Setting a reread delay protects against 
accidental rereads of the same bar code.  Longer delays are effective in minimizing accidental rereads.  Use shorter delays in 
applications where repetitive bar code scanning is required.  Reread Delay only works when in 

6).  Default = Medium.

If you want to set your own length for the reread delay, scan the bar code below, then set the delay (from 0-30,000 milliseconds) 
by scanning digits from the inside back cover, then scanning Save. 

Sometimes 2D bar codes can take longer to read than other bar codes.  If you wish to set a separate Reread Delay for 2D 
bar codes, scan one of the programming codes that follows.  2D Reread Delay Off indicates that the time set for 

 is used for both 1D and 2D bar codes. Default = 2D Reread Delay Off.