Intermec SR60 User Manual

You can enable any bar code symbology described in this chapter 
because all the symbologies in this chapter are supported by all 
the SR60 scanner interface types.

Identify the symbologies you want to enable. Use the bar codes in 
this chapter to enable those symbologies and set the data format 
options (such as check digit or start/stop characters) required by 
your host system for each symbology type.  You must enable the 
symbology format options settings that are compatible with your 
host system.

The factory default settings for each interface were chosen to 
meet the standard industry requirements. In most cases you do 
not need to change the symbology format settings. 

If you are unsure of your system requirements, test the scanner 
using the factory settings before making any changes. For a list of 
factory default settings, see Appendix A, “Factory Default 
Configuration” on page 145.

You can enable specific symbologies or disable all symbologies 
using these programming bar codes:

• The Disable All Symbologies bar code on page 68 lets you 

disable all the symbologies currently enabled on the scanner. 
To optimize scanner performance, you should scan this bar 
code before you enable only the symbologies you require.

• The Enable Code 39 bar code on page 68 selects Code 39 as 

an active symbology and allows selection of check digit, start/
stop and single digit options.

• The Enable PharmaCode 39 bar code on page 69 is a 

symbology subset of Code 39.  Enabling PharmaCode 39 
allows the scanner to read both PharmaCode 39 and Standard 
Code 39 labels.

Note: Standard Code 39 must be enabled before you can 
enable PharmaCode.