Intermec SR60 User Manual

After enabling one or more symbologies, you can use the bar 
codes in the following sections to configure the symbology 
options and features. 

This section describes the Code 39 options and contains the 
programming bar codes you can use to configure those options.

The Code 39 symbology has the following programmable 
features:

• Check  Digit

• Start/Stop Characters

• Code 39 Full ASCII

• Minimum Label Length

• Read  Verification

Check Digit calculates the check digit to verify that the check 
digit contained in the bar code label is correct.  If you enable this 
feature, your bar codes must contain a check digit.

Start/Stop Characters selects either Send or Don’t Send 
depending on your host’s interface requirement.

Code 39 Full ASCII enables or disables the ability to decode 
Code 39 Full ASCII labels.

Minimum Label Length sets the minimum label length required 
for the Code 39 symbology. This feature causes the scanner to 
ignore small label segments, reducing the possibility that a 
portion of a good label is incorrectly seen as an entire label.

Read Verification is the number of times the scanner is required 
to read the bar code data before sending the label data to the host.