Intermec SR60 User Manual

• The Set First Fixed Length bar code on page 88 instructs 

the scanner that the next two programming labels scanned 
will define the first fixed label length. This setting can be 
any even number of characters between 02 and 50 
characters.

• The Set Second Fixed Length bar code on page 88 

instructs the scanner that the next two programming 
labels scanned will define the second fixed label length. 
This setting can be any even number of characters between 
02 and 50 characters.

• The No Second Fixed Length bar code on page 88 

configures the scanner to recognize only the first fixed 
length.

Read Verification is the number of times the scanner is required 
to read the bar code data before sending the label data to the host.

Scan the following bar codes to configure the Interleaved 2 of 5 
symbology options. 

Note: For this symbology, the scanner decodes up to 50 
characters, but the actual length read varies depending 
upon the interface type, bar code physical size, and print 
quality.