Multi-Tech Systems FF130 User Manual
Chapter 4: Client Software Installation
76
FaxFinder Administrator User Guide
5.
Click OK. A new FaxFinder entry appears on the Devices tab.
The device status should go from Not logged in to Logging in to Connected. If you are connecting to a
FaxFinder x20, it shows Idle instead of Connected. If it shows Login Failure, either:
FaxFinder x20, it shows Idle instead of Connected. If it shows Login Failure, either:
●
The IP address or domain name is wrong. If so, delete the entry (right-click DELETE), and enter a
new one;
new one;
or
●
The Username/Password combination is wrong. Verify that the Username/Password you
entered matches the Username/Password assigned to the client-user. To check, right-click on
the FaxFinder listing on the Device tab and select Properties.
entered matches the Username/Password assigned to the client-user. To check, right-click on
the FaxFinder listing on the Device tab and select Properties.
Note:
Username and Password are case-sensitive.
Disassociating a FaxFinder Unit from the
Client
Client
Use this procedure if you need to remove a specific FaxFinder unit from the client. This procedure severs
the tie between your PC and a specific FaxFinder unit so that you cannot use it to send faxes. However,
you can receive faxes in email form from the FaxFinder server.
the tie between your PC and a specific FaxFinder unit so that you cannot use it to send faxes. However,
you can receive faxes in email form from the FaxFinder server.
If you have multiple FaxFinders set up in the client software and only want to remove one, you will need
to know the IP address of the FaxFinder you want to disconnect.
to know the IP address of the FaxFinder you want to disconnect.
1.
Click the FaxFinder Client icon,
, and select Show FaxFinder Fax Client.
2.
Right-click on the FaxFinder unit that you want to disconnect and select Delete.