Motorola DS6707 User Manual

2 - 2

Symbol DS6707 Digital Imager Scanner Product Reference Guide

The digital imager scanner issues different beep sequences and patterns to indicate status. 

 defines beep 

sequences that occur during both normal scanning and while programming the digital imager scanner.

Low/medium/high beeps

Power up.

Short high beep

A bar code symbol was decoded (if decode beeper is enabled).

4 long low beeps

A transmission error was detected in a scanned symbol. The data is ignored. This 
occurs if the digital imager scanner is not properly configured. Check option 
setting.

5 low beeps

Conversion or format error.

Low/high/low beeps

ADF transmit error. See 

.

High/high/high/low beeps

RS-232 receive error.

Short high beep 

Correct entry scanned or correct menu sequence performed.

Low/high beeps

Input error; incorrect bar code, programming sequence, or Cancel scanned; 
remain in ADF program mode.

High/low beeps 

Keyboard parameter selected. Enter value using numeric bar codes.

High/low/high/low beeps

Successful program exit with change in parameter setting.

Low/high/low/high beeps

Out of host parameter storage space. Scan 

.

High/low beeps

New Code 39 data was entered into the buffer.

3 long high beeps

Code 39 buffer is full.

Low/high/low beeps

The Code 39 buffer was erased or there was an attempt to clear or transmit an 
empty buffer.

Low/high beeps

A successful transmission of buffered data.

2 long low beeps 

File ID error. A bar code not in the current MPDF sequence was scanned.

3 long low beeps 

Out of memory. There is not enough buffer space to store the current MPDF 
symbol.

4 long low beeps 

Bad symbology. Scanned a 1D or 2D bar code in a MPDF sequence, a duplicate 
MPDF label, a label in an incorrect order, or trying to transmit an empty or illegal 
MPDF field.

5 long low beeps 

Flushing MPDF buffer.