NCR 7870 User Manual
7-6
Chapter 7: Programming
Programming Tags
After completing the worksheets, enter the information using the
special programming tags contained in the NCR 7800, 7870, 7875, 7880,
and 7890 Programming Tags
special programming tags contained in the NCR 7800, 7870, 7875, 7880,
and 7890 Programming Tags
book (BST0-2121-74). You do not need a
large number of special programming tags, only 5 unique tags and 16
hexadecimal (Hex) character tags. The following identifies each
programming tag, its function, and the associated indicators.
hexadecimal (Hex) character tags. The following identifies each
programming tag, its function, and the associated indicators.
Abort
Function
– In Base Programming State
If this tag is scanned in the Base Programming State, programming
is terminated and no previously entered parameters are saved.
is terminated and no previously entered parameters are saved.
Indication
– In Base Programming State
•
Short beep as soon as tag is read – Good Read tone
•
Status indicator flashes red twice
•
Four quick beeps from low to high frequency
Function
– In Specific Programming Mode
If this tag is scanned in a Specific Programming Mode, all
parameters entered are saved and the NCR 7875 goes to the Base
Programming State.
parameters entered are saved and the NCR 7875 goes to the Base
Programming State.
Indication
– In Specific Programming Mode
•
Short beep as soon as tag is read – Good Read tone
•
Status indicator flashes green once
•
Programming returns to Base Programming State.