Datalogic Scanning 3200VSI User Manual

Image Brightness

This feature sets the image brightness value. Follow these instructions to configure this feature:

1. Scan the START bar code.

2. Scan the Set Image Brightness bar code.

3. Turn to 

 and scan the two digits (zero-padded) representing the desired 

brightness in decimal notation. The configurable range is 01-0x0A by increments of 01.

4. Scan the END bar code.

This feature sets the image contrast value. Follow these instructions to configure this feature:

1. Scan the START bar code.

2. Scan the Set Image Contrast bar code.

3. Turn to 

 and scan the two digits (zero-padded) representing the desired 

contrast in decimal notation. The configurable range is 01-0x0A by increments of 01.

4. Scan the END bar code.

START / END

PROGRAMMING bar codes

DEFAULT SETTING FOR THIS FEATURE: 09

START / END

PROGRAMMING bar codes

DEFAULT SETTING FOR THIS FEATURE: 09