Epson ActionScanner II User Manual
Installing Your Software 1-3
Choose Do not install a driver and click OK. You do not need to
install EZ-SCSI, even if you are using an Adaptec SCSI card, if the
card is already set up. See your Adaptec documentation for
instructions on how to set up this card. If you are using a
bidirectional card, you only need to install the card—no software
configuration is needed.
install EZ-SCSI, even if you are using an Adaptec SCSI card, if the
card is already set up. See your Adaptec documentation for
instructions on how to set up this card. If you are using a
bidirectional card, you only need to install the card—no software
configuration is needed.
2. Insert the EPSON Scan! II program diskette 1 in a diskette
drive.
3. From Windows 95, click Start and then Run.
From the Windows 3.1 Program Manager, open the File
menu and select Run.
menu and select Run.
4. Type
A:\SETUP
(or
B:\SETUP
if you inserted the diskette in
drive B) and click OK. After a few moments, you see the
initial setup screen.
initial setup screen.
5. Click OK to continue. A dialog box displays the path in
which the installer software will install the EPSON Scan! II
program. The default path is C:\EPSCAN32 for Windows 95
or C:\EPSCAN2 for Windows 3.1.
program. The default path is C:\EPSCAN32 for Windows 95
or C:\EPSCAN2 for Windows 3.1.
6. Click OK to accept the default pathname, or enter a new path
and click OK.
7. The next dialog box displays the path in which the installer
software will install the EPSON TWAIN program. The
default path is C:\WINDOWS. Click OK to accept the
default pathname, or enter a new path and click OK.
default path is C:\WINDOWS. Click OK to accept the
default pathname, or enter a new path and click OK.
8. The installer software copies the Scanning Utilities to your
hard disk drive and prompts you for diskette 2 when
necessary.
necessary.