Panasonic KV-S3065CW User Manual
10
Component Identification
Hopper extension tray
Exit substopper
Exit extension tray
Exit stopper
Document guide
Front door release
Exit document guide
Front door
STOP/START button
Hopper
Inside the front door.
Used to stop or start scanning
a document.
a document.
Power indicator
When the power is turned on,
the green indicator lights.
When an error occurs, the
indicator will change to red,
and light steadily or flash.
the green indicator lights.
When an error occurs, the
indicator will change to red,
and light steadily or flash.
Power switch
[ : on position
± : off position
± : off position
Exit tray
AC inlet
Post-imprinter door (Back door)
Used for attaching optional imprinter
unit and ink cartridge.
An imprinter unit installed here is
called a post-imprinter.
unit and ink cartridge.
An imprinter unit installed here is
called a post-imprinter.
SCSI connector
Used to connect the scanner
unit to the host computer.
unit to the host computer.
Fan exhaust vent
Power cord
Pre-imprinter door
(Exit tray)
(Exit tray)
Used for attaching optional
imprinter unit and ink cartridge.
An imprinter unit installed here
is called a pre-imprinter.
imprinter unit and ink cartridge.
An imprinter unit installed here
is called a pre-imprinter.
ADF / manual feed
selector
selector
To prevent double feeding,
adjust the selector to feed the
scanning document properly.
(Refer to page
adjust the selector to feed the
scanning document properly.
(Refer to page
.)
Paper path selector
.)
Power cord shown
on the figure is for
100–200 V.
on the figure is for
100–200 V.
USB connector
Used to connect the scanner
unit to the host computer.
unit to the host computer.