Uniden UBC93XLT User Manual

31

2 seconds after the end of a transmission before 
scanning proceeds to the next channel. To turn 
the function off or on, press Func + Dly.

•

If you enter a frequency that has already been 
entered elsewhere, the scanner sounds an error 
tone and displays the channel that was 
duplicated. If you entered the frequency by mis-
take, press   then enter the correct frequency. 
To enter the frequency anyway, press E to 
accept.

4. To program the next channel in sequence, press 

E/Pgm then repeat Steps 2 and 3.

If you do not have a reference to frequencies in your 
area, use a search to find a transmission.

There are two search features available. Service 
Search (see below) and Chain Search on page 38.

Note: When the scanner starts searching, it auto-
matically turns on the delay function. To turn delay 
on or off, press Func + Dly.

You can search for police, railroad, marine, aircraft, 
UHF CB, and AM CB transmissions without knowing 
the specific frequencies used in your area. The 
scanner is preprogrammed with all the frequencies 
allocated to these services. To use this feature, 
press Func + Svc. SRCH appears and the scanner 

searches starting with the police service bank. To 
select a different service bank, repeatedly press 
Func + Svc. Service mode appears on the display.

When the scanner stops on a transmission, press 
Hold to stop searching and listen to the 
transmission. Hold appears. In this mode, you can 

UBC93XLT Paper OM.fm  Page 31  Monday, May 14, 2007  9:01 AM