Opticon CRD972X User Manual

1. Fix the small thin cord of the strap around the 
pillar of the bar code data collector. (ref. 1)

2. Insert the handle cord of the strap into the thin 
loop in order to fix the hand strap. (ref. 2)

TO AVOID DROP HOLD THE HAND STRAP 
AROUND THE WRIST WHEN CARRYING THE 
BAR CODE DATA COLLECTOR. (REF. 3)

DO NOT SWING THE BAR CODE DATA 
COLLECTOR AROUND. (REF. 4)

FOLLOW THE INSTRUCTIONS FOR 
INSTALLING, CHARGING AND REMOVING THE 
BATTERIES VERY STRICTLY.

WRONG USE OF BATTERIES MIGHT CAUSE 
SERIOUS DAMAGE TO THE BAR CODE DATA 
COLLECTOR OR TO THE CRADLE.

THE PRODUCTS ARE NOT WARRANTED FOR 
DAMAGE, DEFECTS, MALFUNCTION OR LOSS 
OF DATA, RESULTING FROM INCORRECT USE 
OF BATTERIES.

Never remove the battery while the bar code 
data collector is turned on. 
Doing so can cause data in the bar code data 
collector to be deleted. If you have data stored, 
make sure the data is transmitted to the host 
system. 

Use proper battery
Only use the Opticon rechargeable battery as 
specified from Opticon.

Insert the battery correctly. 
The bar code data collector may be damaged by 
wrong insertion. Handle properly and do not force.

Use the cradle to charge battery
The battery of Opticon can only be charged inside 
the bar code data collector.

If the bar code data collector with the battery is 
placed in the cradle, the voltage and the required 
charging time will be automatically determined and 
the cradle will charge for a maximum of 8 hours. 
The charging procedure is fully automated.

1

2

3

4