Uniden BC246T User Manual
61
Programming Radio Systems
When the scanner prompts Confirm?, press E to accept
the settings. The scanner creates an empty LTR system,
with a default name of System nnN L.
nNn
the settings. The scanner creates an empty LTR system,
with a default name of System nnN L.
nNn
increments as you add new systems. L indicates that
this is an LTR system.
Next, refer to the appropriate section to set system-wide
options. For most settings, you can accept the default.
However, for the items in bold, you must enter informa-
tion in order for your scanner to scan the system.
Next, refer to the appropriate section to set system-wide
options. For most settings, you can accept the default.
However, for the items in bold, you must enter informa-
tion in order for your scanner to scan the system.
• See “Editing the System Name” on Page 63
• See “Setting the System Hold Time” on Page 64
• See “Editing the System Quick Key” on Page 63
• See “Setting the Channel Delay Time” on Page 65
• See “Setting ID Scan/Search (Trunked Systems
• See “Setting the System Hold Time” on Page 64
• See “Editing the System Quick Key” on Page 63
• See “Setting the Channel Delay Time” on Page 65
• See “Setting ID Scan/Search (Trunked Systems
• See “Deleting Systems” on Page 71
• See “Copying Systems” on Page 71
• See “Setting System Frequencies” on Page 61
• See “Entering/Editing LTR Channel Groups” on
• See “Copying Systems” on Page 71
• See “Setting System Frequencies” on Page 61
• See “Entering/Editing LTR Channel Groups” on
Setting System Frequencies
SET FREQUENCIES
E
New FREQUENCY
E
Input a system frequency, then press E. The scanner then
prompts you to enter the LCN for the entered frequency.
Enter the LCN, then press E.
To enter additional frequencies, press
prompts you to enter the LCN for the entered frequency.
Enter the LCN, then press E.
To enter additional frequencies, press
, use the scroll
control to select New Frequency, then repeat the above.
Entering/Editing LTR Channel Groups
To enter channels in a system, first set up a channel
group (or groups) to hold the channels. Then, enter the
channel and channel parameters in the group(s).
group (or groups) to hold the channels. Then, enter the
channel and channel parameters in the group(s).
Menu
BC246T Paper OM 062405.fm Page 61 Tuesday, June 28, 2005 10:12 AM